6
LED Status:
•
Not Included: LED blinks 5 times
•
Inclusion Complete: LED blinks 1 time
SmartStart
SmartStart simplifies the installation and setup process by having you
scan the QR code with your smartphone. Refer to your controller's
manual for instructions on activating SmartStart. When the sensor is
powered on while not included , it will go into SmartStart Inclusion
Mode. While in this mode, the sensor can be added to a Z-Wave®
controller that supports SmartStart.
Exclusion
To remove the sensor from your network, put your Z-Wave controller
into Exclusion Mode and follow its instructions to delete the sensor
from the controller. Ensure the rear cover is closed firmly, then trigger
the reed switch 3 times in 5 seconds to send the NIF for exclusion. Note
that when it is excluded, all user and network settings will be cleared
and the sensor will be set to its factory default settings.