8
active Bluetooth connection, press and hold the button for 3-5 seconds to
disconnect any paired devices.
6.
TREBLE-: Press the button to reduce the treble response.
7.
BASS-: Press the button to reduce the bass response.
8.
VOL-: Press the button to decrease the volume level.
9.
STOP: Press the button to stop audio playback. This only functions in USB Mode.
10.
PLAY/PAUSE: Press the button to pause or resume audio playback. This only
functions in Bluetooth® and USB Modes.
11.
NEXT: Press the button to skip forward to the next track. This only functions in
Bluetooth and USB Modes.
12.
PREV: Press the button to skip back to the previous track. The only functions in
Bluetooth and USB Modes.
13.
: Press the button to increase the treble response.
14.
BASS+: Press the button to increase the bass response.
15.
VOL+: Press the button to increase the volume level.
16.
MUTE: Press the button to turn audio muting on or off.
PAIRING THE SOUNDBAR AND SUBWOOFER
Perform the following steps to pair the subwoofer with the soundbar.
1.
Ensure that the soundbar is located within about 32 feet (10 meters) of the
soundbar. If there are any obstructions, the maximum range is reduced.
2.
Plug one of the included AC power cords into the AC IN jack on the subwoofer,
then plug the other end into a nearby AC power outlet. The Pairing Indicator will
begin flashing slowly.
3.
Use a small pin to momentarily press the WPS Pairing Button. The Pairing Indicator
will begin flashing rapidly.
