10
USB PLAYBACK
The soundbar features the ability to playback mp3 audio files stored on a USB flash drive.
The flash drive can have a capacity up to 32GB and can store mp3 files in both the root
directory and subdirectories. The mp3 files can have filenames up to 8 characters long, not
including the mp3 file extension.
To begin playback, insert the drive into the USB port on the side panel. The soundbar will
automatically switch to USB mode and will begin playing files. You can use the remote
control to stop, pause, or resume playback and to skip forward or backward through the
files on the drive.
BLUETOOTH PAIRING
Perform the following steps to pair the soundbar with your mobile device.
1.
Ensure that your mobile device is located within about 3 feet (1 meter) of the
soundbar.
2.
Press and hold the STANDBY button on the soundbar side panel for 2 seconds or
press the STANDBY button on the IR remote control to turn the soundbar on.
3.
Press the STANDBY button on the soundbar side panel repeatedly until the Display
flashes bt, indicating the soundbar is in Bluetooth® pairing mode. Alternatively, use
the INPUT button on the remote control instead of the STANDBY button on the
soundbar.
4.
Open the Bluetooth settings on your mobile device and scan for nearby Bluetooth
devices.
5.
Locate and select the SB-100SW entry. If prompted for a passcode, enter 0000 (four
zeros). If you cannot locate the SB-100SW entry, restart the soundbar and try again.
6.
Once the soundbar is paired with your mobile device, the display will cease flashing
and will show bt.
