31
Click the RS232 Control tab to display the RS232 Control screen.
Port: Use the pull-down list box to select Local, which refers to the RS232 port of the
scaler/switch, or HDBT, which refers to the RS232 port of the HDBaseT™ receiver.
Baud Rate: Use the pull-down list box to set the baud rate. The baud rate for the Local
port is fixed at 9600, but the HDBaseT receiver can accept other baud rates. The
available baud rates for the receiver are 2400, 4800, 9600, 19200, 38400, 57600,
and 115200.
Command: Type the desired RS232 command in to the text field.
Hex: Check the Hex checkbox if the RS232 command is in hexadecimal format. Leave it
unchecked if the command is in decimal form.
Send: Click the Send button to send the RS232 command to the selected RS232 port.
: Click the
icon to display the Control screen.
