22
Send the command 50616% using either third party RS232 control software or from
the RS232 Control screen in the TCP/IP menu system.
Use the arrow buttons on the included remote control or on the front panel to navigate
the OSD menu system. Use the OK button on the remote control or the ENTER button on
the front panel to confirm the selection.
Use the Options screen in the OSD system to adjust the following parameters and settings.
Output Adjust: Allows adjustment of the following elements:
Image position X and Y
Aspect ratio
H Polarity and V Polarity
HDMI output on/off
HDBaseT output on/off
Input5 Select: Allows you to determine the type of video signal for Input5. You may set
it to VGA1 for VGA signal, AV1 for composite video, or YPbPr for component
video.
Baud Rate: Allows you to set the RS232 communication speed. You may set it to 2400,
4800, 9600, 19200, 38400, 57600, or 115200.
