10
Next, using a tape measure and a pencil, mark potential drill locations on the wall
exactly 740mm (29.13") apart. Use a carpenter's level to ensure that the locations are
level. This kit includes two screws and two wall anchors, which can be used for either
the satellite speakers or the soundbar. If you want to mount both the satellites and the
soundbar to the wall, you will need to obtain two additional screws and wall anchors.
Soundbar Physical Connections
This section outlines the steps necessary to physically connect the soundbar to various
audio sources. Only a single audio source is necessary for the soundbar to function, so
all other connections are optional. Note that a Bluetooth® connection is not physical, so
will be covered in a later section. Note also that only an S/PDIF digital optical cable is
included, so all other cables must be obtained separately.
1.
Ensure that all equipment to be connected is powered off and unplugged from
its power source.
2.
Using High Speed HDMI® Cable, plug one end into the HDMI input on your TV,
then plug the other end into the HDMI OUT TO TV (ARC) port on the soundbar.
Note that you should use the input that supports the ARC feature, if your display
has one.
3.
Using the High Speed HDMI Cable, plug one end into the HDMI IN-1 port on the
soundbar, then plug the other end into the output of an HDMI source device.
4.
Using the High Speed HDMI Cable, plug one end into the HDMI IN-2 port on the
soundbar, then plug the other end into the output of an HDMI source device.
5.
Using the included S/PDIF digital optical cable, plug one end into the OPTICAL
port on the soundbar, then plug the other end into the digital optical output of
an audio source device.