8
12.
Turn the assembly over, then secure the four corners using the remaining M6x8
screws.
Screen Material Installation
1.
Wear a pair of gloves to prevent the oils on your hands from contacting the screen.
2.
Lay the EPE cotton mat flat on the floor, then unroll the screen material onto the
mat with the rear side up (the rear side is black). Ensure that the screen material is
flat with no wrinkles.
3.
Place the frame assembly on the center of the screen materials with the corner
pieces and t-joints on the underside. The snap lugs should be visible.
4.
Insert the tension rods through the holes at the
corners of the screen materials. Note that the two
long tension rods are to be used on the vertical edges
and the four short rods are for the horizontal edges.