21
16.
Press and hold the
button to decrease the volume level of the media player
until the display shows 0.
17.
Press the Z1 button underneath the media player to set the Media Player output
to Zone 1.
18.
Press and hold the
to increase the output volume level of the media player
step-by-step while slowly increasing the ZONE 1 LEVEL control until the FM
station is playing at a comfortable listening level. This is the base line volume to
which we will match the outputs and volume levels of the other inputs.
19.
Start playback of audio on the CH 1 audio source.
20.
Press the Z1 button in the CH 1 section to enable output of CH 1 audio to Zone 1.
21.
Using a small flat head screwdriver slowly adjust the CH 1 GAIN control on the
rear panel alternately with the CH 1 LEVEL control on the front panel until the
volume level matches that of the FM tuner (both audio sources should be
simultaneously audible on the Zone 1 speakers).
22.
Press the CH 1 Z1 button to turn off CH 1 audio from the Zone 1 speakers.
23.
Repeat steps 19-22 for the CH 2-5.
24.
Follow the instructions for your phone system to broadcast a page.
25.
Using a small flat head screwdriver, slowly adjust the TEL VOLUME until the page
volume is at the desired level.
Congratulations, you have successfully installed and setup your amplifier!
Содержание 18802
Страница 18: ...18 Sample Connection Diagram ...
Страница 19: ...19 Block Diagram ...
