Monoprice 18802, Руководство пользователя

Страница: 17 / 31

17
Microphone and Line Connections
The amplifier features three combination XLR/TRS connectors for connecting
microphones or line level inputs, plus two pairs of stereo RCA connectors for line level
inputs. Perform the following steps to make microphone and line connections.
1. Insert the XLR or TRS/TS connector from a microphone or line
level source into the CH 1 input.
2. If the connected device is a dynamic microphone, slide the CH 1
Input Type Switch to the MIC position. If the connected device is
a condenser microphone, which re48V phantom power,
slide the switch to the PHANTOM position. If the connected
device is a line level source, slide the switch to the LINE position.
3. Repeat steps 1 and 2 for the CH 2 and CH 3 inputs, as desired.
4. Plug the left RCA output of your line level source into the CH 4 L RCA jack, then
plug the right RCA output into the CH 4 R RCA jack.
5. Repeat step 4 for the CH 5 input, as desired.
RS-232 Connection
A 9-pin DE-9 (aka DB-9) serial connector is provided, which you can connect to a
computer for automated control. Perform the following steps to connect a computer to
the amplifier.
1. Plug one end of a 9-pin serial cable into the RS232 jack on the amplifier, then
tighten the screws to secure it in place.
2. Plug the other end of the serial cable into the serial connector on your computer.
Power Connection
1. Ensure that the Power Switch on the front panel is in the OFF position.
2. Plug the included AC power cord into the AC Input Connector and Fuse Holder,
then plug the other end into a nearby AC power outlet.