3
SAFETY WARNINGS AND GUIDELINES
Please read this manual thoroughly, paying extra attention to these safety warnings and
guidelines. Keep this manual in a safe place for future reference.
Installation and Operation
This product should only be installed by a qualified structural contractor. Failure to
follow proper structural code in regard to hanging equipment could result in serious
injury or death.
The ceiling structure to which this projector lift will be attached must have a
minimum load bearing capacity four times the total weight of the lift and any
attached projector. Note that the lift weighs 48.1 lbs. (21.8 kg) and the maximum
weight of any installed projector is 44 lbs (20 kg).
Frequently inspect the installation for imbalance and signs of wear or damage to
cables and springs. Do not use if repair or adjustment is needed.
Do not stand beneath this product while it is in operation.
Before installing the device, remove any unnecessary cables and disable any
equipment not needed for powered operation.
Ensure the lift is visible when raising and lowering to ensure that there are no
obstructions to hinder operation.
When fully lowered, ensure that the bottom of the lift is at least 8 feet above the
floor.
To avoid overheating of the motor, do not operate the lift continuously for more
than 4 minutes. If the motor overheats, internal protection circuitry will shut down
the motor until it cools sufficiently for continued operation.
