monolith OL 141, Руководство пользователя

Страница: 23 / 36

23
Safety
− If the mains cord of the laminator is damaged, the manufacturer,
its customer service team or a person with technical qualifica-
tions must replace it.
− Do not open the housing; instead, have a qualified professional
perform the repairs. Contact the service address provided on
the warranty card. Liability and warranty claims are waived
in the event of repairs or conversions performed by the user,
improper connection of the device or incorrect operation.
− Only parts that comply with the original device data may be
used for repairs. Electrical and mechanical parts, which are
essential for providing protection against sources of danger,
are located in this laminator.
− Do not operate the laminator with an external timer or
separate telecontrol system.
− Do not immerse the laminator or the mains cord or mains
plug in water or other liquids.
− Never touch the mains plug with damp hands.
− Do not perform any other work (such as cleaning) on the
laminator while it is operating.
− Never pull the mains plug out of the socket by the mains cord;
instead, always do so by taking hold of the mains plug.
− Never use the mains cord as a carrying handle.
− Keep the laminator, mains plug and mains cord away from
open flames and hot surfaces.
− Lay the mains cord so that it does not pose a tripping hazard.
− Do not kink the mains cord and do not lay it over sharp edges.
− Only use the laminator in indoor areas. Do not use them in
wet rooms or in the rain.
− Never store the laminator so that it is at risk of falling into a
bath tub or washbasin.
− Never reach to retrieve the laminator if it has fallen in water.
In such a case, immediately disconnect the mains plug.