monolith OL 141, Руководство пользователя

Страница: 21 / 36

21
General information
Reading and storing the user manual
This user manual accompanies this A4 laminator (hereafter referred to
as the “laminator”), and contains important information on setup and
handling.
Before using the laminator, read the user manual carefully. This particularly applies
to the safety instructions. Failure to do so may result in personal injury or damage to
the laminator.
The user manual is based on the standards and rules in force in the European Union.
When abroad, you must also observe country-specific guidelines and laws.
Store the user manual for further use. Make sure to include this user manual when
passing the laminator on to third parties. The user manual can also be downloaded
from our website as a PDF file at www.monolith-support.com.
Explanation of symbols
The following symbols and signal words are used in this user manual, on the
laminator or on the packaging.
This signal symbol/word designates a hazard with mo-
derate risk, which may result in death or severe injury if
not avoided.
This signal word warns of possible damage to
property.
This symbol provides you with useful additional information on
handling and use.
Declaration of Conformity (see chapter “Declaration of conformity”):
Products marked with this symbol meet all applicable Community
regulations for the European Economic Area.
The certified safety seal (GS mark) certifies that the laminator meets
the requirements of the German Product Safety Act (ProdSG). The
GS mark indicates that the safety and health of the user will not be
jeopardised providing the product is used properly, but also in case
of foreseeable misuse. This is a voluntary safety mark issued by TÜV
Rheinland.
General information
NOTICE!
WARNING!