monolith BBQ Guru Edition CLASSIC, Руководство пользователя

Страница: 15 / 24

(The fan position in this image indicates the fan is off)
MONOLITH CONTROL MOUNT SETUP:
Before using a BBQ Guru temperature control unit
with the Monolith BBQ Guru Edition, the control
mount must be attached to the grill.
1.
Align the Monolith control mount in front of the pre-
drilled hole on the left bamboo side table.
2.
Push the control mount screw through the pre-
drilled hole on the left side table and fasten it tightly
with the nut.
3. On the back of the BBQ Guru temperature control
unit, there are two metal hook pins. Align the pins
to the Monolith control mount and push it through
the pre-drilled holes.
4. Slide the BBQ Guru temperature control unit down
the control mount. This will lock and secure the
device into place.
FAN SETUP:
All Monolith BBQ Guru Editions are equipped with a
BBQ Guru temperature control fan housing. This fea-
ture allows the user to control the amount of air flow-
ing into the grill.
1.
Take the spiral fan cord that is included with the
BBQ Guru temperature control unit. Fully insert one
end of the spiral fan cord into the fan port located
on the control.
2. Take the other end of the spiral fan cord and fully
insert it into the side of the fan housing.
IMPORTANT NOTE: When using a BBQ Guru temper-
ature control unit to maintain cooking temperatures
(400°F or below), turn the fan knob counterclockwise
(left) to move it into the ON position. Move the fan knob
clockwise (right) to turn it OFF.
IMPORTANT NOTE:
When the BBQ Guru tempera-
ture control unit is NOT in use, ALWAYS make sure the
fan dial is turned to the OFF position. This will prevent
heat from getting in and destroying the fan unit.
IMPORTANT NOTE:
ALWAYS turn the fan housing
OFF when cooking over 400°F. This will prevent dam-
age to the fan housing.
Hook Pins
Control
Mount Bracket
13 CONTROL MOUNT AND FAN SETUP