33
ZKHT1 Trim Kit
Custom Handles with 3/4" Panels
These instructions are divided into 2 options:
Option 1—For non-dispenser and dispenser models
using custom collar trim.
Option 2—For dispenser model using the standard
full-width trim.
Refer to installation instructions for ZKT42 trim kit.
• Follow Step No. 1 to remove the standard aluminum
trim.
• Follow Step No. 2 and 3 to attach new 3/4" trim
pieces and install panel support brackets.
3/4" custom door panels must be routed to accommodate
these door extrusions. Rout the panels as illustrated, a
maximum of 1/4" deep, and 1-13⁄16" wide, top to bottom
on the handle side.
This kit provides for the installation of custom handles
on 3/4" thick decorator door panels. The door extrusions
and bracket allow custom handles to be secured to the
door structure, rather than the door panels. This kit
contains all the necessary parts for dispenser and non-
dispenser models. Follow the instructions in Option 1
when applying custom handles to a non-dispenser
model or dispenser model using custom collar trim.
Follow the instructions in Option 2 for a dispenser
model using the standard full-width dispenser trim.
Parts List:
A. Fresh food door
extrusion
B. Freezer door extrusion
for non-dispenser
model and dispenser
model using custom
collar. (Option 1)
C. Freezer door extrusion
for dispenser model
using full-width trim.
(Option 2)
D. Freezer door handle
bracket for dispenser
model using full-width
trim. (Option 2)
Tools and materials
required:
• #2 Phillips screwdriver
• Stubby Phillips screwdriver
• Drill and appropriate bits
• Custom panels
• Custom handles
• Safety glasses
Note:
This kit must be used in conjunction with ZKT42 trim kit.
OPTION 1
For non-dispenser
model
or dispenser model
using custom
collar trim
Before
you begin
Kit
contents
Caution:
Optimal final
appearance depends on careful
routing depth. Do not exceed
1⁄4" routing depth.
ZKHT1 INSTALLATION
INSTRUCTIONS
