Monogram ZIS420 Series, Руководство по установке

Страница: 14 / 116

14
TOOLS AND MATERIALS REQUIRED
• Tinsnips to cut banding
• Stepladder
• 1” Bit extension
• Tape measure
• Gloves
• 1/4” Drywall screws
• 5-Gal. Bucket with cover
• 6” Spirit level
• Appliance hand truck
• Tubing cutter
• 7/16” open-end wrench
• #2 Phillips screwdriver
• Drill and appropriate bits
• 5/16”, 7/16” socket
• Safety glasses
• 1-1/8” open end wrench
• Pliers
• 1/4”, 5/16” Combo Rachet
• 35” long 2x4 for Anti-Tip support
• 1/4” copper water line tubing or SmartConnect
™
Refrigerator Tubing kits
• Water shut-off valve
• Custom panels for doors and grille panel
• Screws to secure refrigerator to cabinetry
• Stick-on hook and loop fastener strips for 1/4” side
panels
Installation Instructions - Standard Installation
HARDWARE SUPPLIED
• Water filter bypass plug (on some models)
• Toekick
• 1/4” nut and ferrule
• Dispenser trim for overlay panels (for use with
Custom Panel models).
FLOORING
For proper installation, this refrigerator must be placed
on a level surface of hard material that is at the same
height as the rest of the flooring. This surface should
be strong enough to support a fully loaded refrigerator,
or approximately 1,500 lbs.(680.39 kg).
NOTE: Protect the finish of the flooring. Cut a large
section of the cardboard carton and place under
the refrigerator where you are working.
DISPENSER TRIM FIT EXAMPLES:
(NOT TO SCALE)
1/4” (0.63 cm) FRAMED
PANEL
• The dispenser trim fits over the custom
panel and snaps into the freezer door.
• The clips will not engage the door if the
panel is more than 0.250”
(0.63 cm) thick.
• If the panel is less than 0.250”
(0.63 cm) thick, a noticeable gap may
be created around the dispenser trim.
3/4” (1.91 cm) OVERLAY
PANEL
• The dispenser trim fits over the custom
panel and snaps into the freezer door.
• The clips will not engage the door if the
panel is more than 1.100” (2.79 cm)
thick.
• If the panel is less than 1.100” (2.79
cm) thick, a noticeable gap may be
created around the dispenser trim.
1/4” Dispenser Trim
3/4” Overlay Dispenser Trim
31-1000450 Rev. 1