CUSTOMIZATION BASICS:
Framed Or Overlay Panels, Custom
Handles and Accessory Kits
Professional Style Stainless Steel Refrigerators
Stainless steel wrapped refrigerators with beveled edges
and professional style handles. These models are shipped
ready for installation.
Stainless Steel Wrapped Refrigerators
Stainless steel wrapped refrigerators with beveled edges
and tubular stainless steel handles that coordinate with
other Monogram appliances. These models are shipped
ready for installation.
Trimmed Refrigerators
Trimmed refrigerators are designed to be customized
with decorative panels. Field installed custom door and
grille panels are required.
Side Panels
Side panels must be used whenever the sides of the
refrigerator will be exposed.
6
Optional Accessory Kits
• ZKHCSS2: Monogram Tubular Stainless Steel handles
designed to fit 3/4
”
overlay panels. This kit also includes a
handle side trim for custom handles.
• ZKHPSS1: Professional Tubular Stainless Steel Handle
designed to fit 3/4” overlay panels. Kit includes one
handle. Order 2 kits for bottom-freezer refrigerators from
your Monogram supplier.
• ZUG2: For side-by-side installation of two trimmed
bottom-freezer refrigerators. This kit provides for the
installation of a unified custom grille panel to span the
width of two units using a framed or overlay panel.
• ZUGPP2: For side-by-side installation of two professional-
style bottom-freezer refrigerators. This kit provides a
unified stainless steel grille panel to span the width of two
units.
• ZUGSS2: For side-by-side installation of two stainless steel
wrapped bottom-freezer refrigerators. This kit provides a
unified stainless steel grille panel to span the width of two
units.
• ZKHCT: Handle side trim for left-hand and right-hand
doors. For use on 3/4
”
custom panels when using a
custom handle.
• ZTK36BFRHH: Trim kit for standard installation using
custom panels. This kit is for use with a right hand door
swing.
• ZTK36BFLHH: Trim kit for standard installation using
custom panels. This kit is for use with a left hand door
swing.
Design Guide
3/4” OVERLAY PANEL DIMENSIONS
(Flush Installation Only)
For a more custom appearance, overlay panels may be
installed to give a flush appearance with surrounding
cabinets. The overlay panel must be 3/4” thick. Panel
attaches to included brackets to provide mounting to the
appliance door.
IMPORTANT NOTE: Maximum total weight for the assembled panels:
Door panel – 67 lbs.
Grille Panel – 18 lbs.
1/2”
1/2”
1-1/4”
1”
1-1/4”
1”
Top/Bottom Hinge
Clearance
Router 1/8” Deep
Grille Panel
Fresh Food
Panel
38"
9-5/8"
Freezer Drawer
Panel
22-5/16"
46-1/2"
CUSTOM HANDLE DESIGN GUIDE
(Flush Installation Only)
For custom handle installation, counterbore holes in rear
of decorative panels may not exceed 1/4” depth to ensure
1/2” material thickness remains for handle support.
NOTE: The counterbore
must not exceed 1” in
diameter.
Minimum distance from handle
side edge to handle center on
the fresh food door should be
2-1/2” as shown.
Minimum distance from top
edge to handle center on the
freezer drawer should be 1-1/2”
as shown.
1/4”
1/2”
3/4”
2-1/2”
1-1/2”
Improper installation can lead to a finger pinch
point hazard between the side door trim and the
cabinets when operating the door, especially
with children. To minimize this risk you must
follow the installation instructions for cabinet
dimensions, trim assembly, and door stop angle.
Door Trim Pinch Point Hazard
WARNING
Содержание ZICS360NHLH
Страница 27: ...27 Notes ...
