Type 318.xx
2018-12-17
9
2.
Safety
2.1.
General
This section provides an overview on all safety aspects for optimum protection of staff during
assembly and startup as well as safe and trouble-free operation.
WARNING
Danger due to failure to observe the
safety instructions!
Failure to observe the safety and
instructions listed in these assembly
instructions can lead to considerable
danger.
►
Always pay attention to all warnings and
instructions specified here.
2.2.
Staff requirements
2.2.1.
Qualifications
WARNING
Risk of injury due to insufficient
qualification!
Improper use can result in considerable
damage to persons or property.
All activities shall only be performed by
qualified
staff.
The following qualifications are stated in the operating instructions for various different fields
of activities.
Instructed person
was given instruction by the operator on his/her assigned tasks and possible dangers
resulting from improper conduct.
Specialist staff
is able to carry out assigned work tasks as well as recognize and prevent possible
dangers based on his/her technical training, knowledge and experience, including
knowledge of applicable regulations.
Qualified electrician
is able to carry out assigned work tasks on electrical systems as well as recognize and
prevent possible dangers based on his/her technical training, knowledge and
experience, including knowledge of applicable standards and regulations.
