Monitor MB206, Справочное руководство

Страница: 54 / 98

Configuration Options 48
Disbursement is being used and you wish to ensure that the user has sufficient funds available for
each of the extended options available with the Disbursement. It may also be useful in cases where
the machine being controlled by the Terminal may continue to complete a copy or print run after it
has been disabled, and you wish to provide a reasonable level of available funds at the start of the
job to minimize the risk of the user exceeding their account balance in this way. The user will only
see the available balance as the actual balance minus the minimum balance amount. For example,
a user with a ten dollar balance who uses a machine with a two dollar minimum balance will see that
they only have eight dollars available.
Extension Number
This option is not visible if Type is set to Non-Extended . Extensions describe the detail of the
transaction, such as A4 B&W vs A4 Colour copies. They are defined using one of two different
methods:
1) An analogue signal triggering a terminals opto-coupler input steering lines at the time a copy
pulse is detected. A terminal has three of these steering lines which means a total of up to eight
different extensions can be detected.
2) Via a serial interface into a copier or other device. As it is a serial protocol, there is no longer the
8 extension limitation. For this reason, a User Defined 32 type is usually chosen for this
purpose.
Extension Name
A description of the extension number, such as A4 Colour .
Extension Code
A free text field for reporting purposes of up to 40 characters. The intended use of this field was for
product SKU numbers for stock re-ordering purposes in a vending environment, but can be used
for any kind of reporting purpose.
Count Item Price
This value * Count Items will be charged to the user.
Count Item Cost
Useful only for the facility owner to calculate the actual cost of doing business. This value is not
used to calculate the charge to the user.
Count Item Output 01
This is the Output Relay Control that will activate the appropriate relays when the user Account
balance is less than two times the price. There has been reservation made for two additional relays
in the future, therefore when you see the default setting of ‘15’, this means that if four relays are
fitted, the setting will be ‘All Relays On’, but as there are only two relays currently, it has the same
effect as setting it to ‘03’. There are five options:
1) 00 = All relays off
2) 01= Relay 1 ON, Relay 2 OFF
3) 02= Relay 1 OFF, Relay 2 ON
4) 03= All Relays ON
5) 15=All Relays ON (see notes)
Count Item Output 02
This is the Output Relay Control that will activate the appropriate relays when the user Account
balance is less than two times the price. There has been reservation made for two additional relays
in the future, therefore when you see the default setting of ‘15’, this means that if four relays are