Monitor MB206, Справочное руководство

Страница: 21 / 98

15 Configuration Options
Configuration Options
The terminals are extremely flexible due to the vast number of configuration options. Some of these
options are sent from Supervisor Net, but other options must currently be set on the terminal itself.
This is a list of all configuration options, and whether they are found Internally (Set through the
terminal) or Externally (Sent from Supervisor Net). In some situations the options are found in both
places, in which case the setting from Supervisor over-rides the setting set in the terminal.
These options are explained in more detail in further sections.
Option Source
Terminal ID Internal
Main Serial Port Baud Rate Both
Main Serial Port Parity Internal
Main Serial Port Device Internal
Ignore Frame Errors on Main
Serial Port Internal
Aux Serial Port Baud Rate Both
Aux Serial Port Parity Internal
Aux Serial Port Device Internal
Ignore Frame Errors on Aux Serial
Port Internal
RTS Delay Time Internal
Poll before Acknowledge Period Internal
Enable TCP-IP Communications Internal
Terminal IP Address Internal
Subnet Mask Internal
Server IP Address Internal
Gateway Address Internal
TCP-IP Port Internal
Enable use of DHCP Internal
TCP-IP Filters Internal
ARP flush time Internal
Alter 'Reset' Password Both
Alter 'Admin' Password Both
Run Mode Both
Clear statistics Internal (And IP Terminal Utility)
Enable use of PINs Internal
'Monitor Card' Prefix Internal