Moniteq Crypto-Lock CC-8521B, Инструкция по эксплуатации

Страница: 8 / 16

8
Functions of Controls and Indicators
KEYPAD
Normal Operation Mode
Keys 1 through 0 : enter PIN code
# Key : sound annunciator in Control Unit and activate 12VDC output signal for use with
external device (not included)
* Key : not used
Green LED : illuminates when correct PIN code has been entered and door is released;
flashes when any key is pressed
PROGRAMMING MODE
Keys 1 through 0 : enter programming codes
# Key : terminate the programming mode
* Key : delimiter for programming codes and parameters
Green LED : flashes continuously, single flash for valid programming entry, three
flashes for invalid programming entry
CONTROL UNIT
Penalty LED : illuminates when invalid PIN penalty feature is activated
AC Power LED : illuminates when the system is AC powered
Battery Power LED : illuminates when the system is battery powered
Output Voltage Switch (24 or 12V) : selects voltage to operate attached locking devices
Output Mode Switch (direct or limit holding current) : direct provides up to 4A of
continuous holding current, limit holds current to approximately 300 mA after locking
device energizes (limit setting permits holding an electric lock or strike open without
damaging its solenoid, will only operate when output voltage switch is set to 24V)
Low Battery LED : illuminates when the battery is low
Alarms : varies, see Alarm Sequences, page 12
F6 : 12VAC power
F4 : 24VDC power
F5 : Lock
F3 : Batt