12
Programming
Function
Sequence
Range of N
Default
PIN Management Functions
Set Defaults
*00*
N/A
N/A
Delete PIN
*10*
N/A
N/A
Set PIN
*11*N*
000 to 999, 9999, 99999 or
999999
No valid PIN
Penalty Time
*12*N*
5 to 60 (seconds)
5 seconds
Invalid PIN Alarm
*13*N*
0=off, 1=on
Off
Door Management Functions
Open Duration
*20*N*
1 to 60 (seconds)
5 seconds
Anti-Follow
*21*N*
0=off, 1=on
Off
Door Propped Alarm Delay
*22*N*
0=off, 1 to 255
(seconds)=on
Off
Door Propped Alarm Duration *23*N*
0=door closed, 15 to 255
(seconds)
Door closed
Forced Door Alarm
*24*N*
0=off, 1=on
Off
Enter the programming mode by pressing the PROGRAM MODE button inside the
control unit. The red program LED in the control unit and the green LED on the keypad
will both flash to verify that the programming mode is active. To exit programming,
press the PROGRAM MODE button again or the # key on the keypad. Alternatively,
the system will revert to normal mode if no keys are pressed for 5 minutes.
Initial Settings
: During a new installation or if existing settings are unknown, it is
recommended that the default values for all PIN and door monitoring settings be reset
by entering *00* on the keypad.
PIN Management
: A new valid PIN code can only be set when the system is in the
programming mode. To establish a new valid PIN, enter *11*N*, where N is any
number containing 3-6 digits. To delete the current valid PIN, enter *10* to effectively
disable the keypad since no PIN entry can be used to release the door.
Penalty Delays
:
An invalid PIN penalty feature protects against an unauthorized user
gaining entry by entering successive guesses of the correct PIN. When an invalid PIN
is entered, the system then ignores all further PIN entries for 5 to 60 seconds. The
default value is 5 seconds. To change the penalty time, enter *12*N*, where N is from
5 to 60. After five successive invalid PIN entries, the penalty time is automatically reset
to 60 seconds until the valid PIN is entered. This feature increases the average time it
would take to successfully guess the valid PIN and is particularly effective in protecting
Содержание Crypto-Lock CC-8521B
Страница 1: ...CRYPTO LOCK Model CC 8521B Access Control System Instruction Manual Ed 11 17 Moniteq Inc...
Страница 2: ...2...
Страница 11: ...11 Figure 2 Wiring Diagram...
Страница 15: ...15...