Page 8 of 19
70068 Rev A 7-12-12
Redundant Buttons
In the event that any of the 3 buttons used to operate the unit becomes inoperable, the
remaining buttons will assume that function, as follows:
•
If the LEFT button is not working, use the RIGHT button to scroll all the way around.
•
If the RIGHT button is not working, use the LEFT button to scroll all the way around.
•
If the TRIGGER is not working at any time, press BOTH the LEFT AND RIGHT buttons at
the same time for TRIGGER functionality.
Personal Identification Number (PIN)
When the unit was installed, you may have been issued a 4 digit PIN. The purpose of this
number is to ensure only you or persons that you intend are able to operate the unit. Before
taking any Standing Breath Alcohol BrAC Test you may be asked to enter your PIN. Depending
on how your unit is configured, you may also be asked to enter your PIN when the unit wakes
up.
(PINS are required by some states, and optional in others. Your Interlock Provider will
provide additional details on this if it is applicable for your program)
To enter your PIN, use the BACK or NEXT buttons to scroll to the desired digit, and then press
the TRIGGER to enter that digit. Repeat for each of the next 3 digits.
Menu Mode
After the unit has woke up and played any recall messages or other notifications, the display will
read “START TEST”. At this point the unit is in MENU MODE, and any of the following functions
described below are available by using the BACK, NEXT and TRIGGER buttons.
START TEST
This menu option is used to take the test that allows the user to start the vehicle. To take this
test, press the TRIGGER
(See Section 6 for further instructions).
ADJUST VOLUME
This function allows the user to adjust the audio volume when the vehicle is NOT RUNNING. To
adjust the volume, press the TRIGGER from this option, and the use the LEFT (DOWN) and
RIGHT (UP) buttons until the desired volume level is achieved, and then press the TRIGGER to
set the volume to that level.
SELECT LANGUAGE
This function allows the user to select the language that will be displayed in the text and played
for the audio. To select another language, press the TRIGGER from this option, and use the
LEFT (BACK) and RIGHT (NEXT) buttons until the desired language is displayed. This unit
offers English and Spanish. When the desired language is displayed press the TRIGGER to set
the language.
