Page 7 of 19
70068 Rev A 7-12-12
Section 3
QuicTest Sample Head Overview
Figure 2-1 Sample Head – Front View
Figure 2-2 Sample Head – Back View
1.
Display Window
1. Trigger Button
2.
Mouth Piece Port
2. Serial Number
3. Disposable Mouth Piece
3. Mounting Clip
4.
Left (Back, <<<) Button
5.
Right (Next, >>>) Button
6.
Detachable Coil Cord Connector
7.
Speaker Ports
Section 4
QuicTest User Menu
Unit Wake Up
Under normal circumstances when there is no activity, the unit will go to “sleep” within 3 to 6
minutes. This is indicated by an asterisk (*) that slowly moves across the display. To wake the
unit up you may either pick it up and move it, or press any button. The unit will wake up and say
“
QuicTest by Monitech
”. A brief stand by period (countdown) may begin, depending on how long
the unit has been asleep and the device temperature. During this time the unit is verifying that it
is functioning properly and warming up. At the end of the standby period, the LCD will display
“START TEST” unless there are lockouts, recalls, or other service needs. These will be
addressed in a later section.
2
4
3
7
5
6
2
3
1
1
