Monico CDL, Инструкция по установке и эксплуатации

Страница: 29 / 35

- 29 -
6.1.4.2 Configuring SMTP
The SMTP tab is used to configure the Simple Mail Transport Protocol. This is the standard protocol used to
send email over the Internet or over other TCP/IP networks. SMTP addresses follow the familiar
name@domain
standard.
The configuration options for the SMTP transport are shown below:
Figure 21
SMTP TRANSPORT

The
Transport Mode
property is used to enable or disable the transport. Note that the mail
manager must be enabled via the Mail tab before the SMTP transport can be enabled. Note also
that at least one transport must be enabled if the mail manager is to be able to deliver messages.

The
Server Selection
property defines how the transport will locate an SMTP server. If Manual
Selection is used, the
Server IP Address
property should be used to manual designate a server. If
Configured via DHCP is selected, at least one Ethernet port must be configured to use DHCP, and
the server must be configured to designate an SMTP server via option 69.

The
Server IP Address
property is used to designate an SMTP server when manual server selection
is enabled. The server must be configured to accept mail from the panel, and to relay messages if
required by the application.