Moni JJ2168, Инструкция по эксплуатации

Страница: 21 / 25

REMOTE CONTROL USE

See FIGURE 16:
F. Forward S. Speed select R . Turning right
B. Brake C. Connection button L. Turning left
R. Rearward HS. Indicating LED light for high speed
NS. Indicating LED light for normal speed LS. Indicating LED light for low speed
WARNING! ONLY AN ADULT CAN USE THE REMOTE CONTROL!
The use of the remote control is always with priority over the manual and pedal operation with the jeep.
(If you use the remote control, the pedal will not work.)

Placing the batteries inside the remote control: The remote control works with batteries, which are not
included in the product. Remove the screw from cover of the battery compartment, then remove the cover and
place 2 pcs AAA (LR03) batteries. Observe the correct polarity, indicated at the bottom of the compartment, as
well as and the correct size. Place the lid back and fasten it with the screw.
Warning! The placing and further replacement of the batteries must be performed by an adult!

How to operate with the remote control:
1. Place batteries in the battery compartment of the remote control.
2.
Connection button (build connection):
Long press the Connection button for 2-4 seconds. Then turn on the power button located on the vehicle
dashboard console, when the low speed indicator goes from flashes into long light , means the connection is
successful. If the low speed indicator only flashes , means the connection failed. Turn off the jeep. Replace the
batteries and repeat the steps above.
2. Brake button: Press the button to stop the vehicle, press it again to release the brake.
3. Speed select button: The switch operates the vehicle to move in low, normal or high speed.
HINT: The vehicle is designed to operate in low speed only in reverse.
NOTICE:
• Do not use the remote controller for about 10 seconds, it will shut down automatically.
• Repeat step 1, when you replace the batteries of the remote controller.
Zhejiang Jiajia Ride
– On Co., Ltd.
hereby declares that this type of radio equipment model JJ2168 complies
with Directive 2014/53/EC. The complete text of EC declaration for compliance can be found at the following
Internet address:
www.moni.bg .
ADVANCED USE
– High speed drive
Make sure your child knows how to steer, how to start and stop the vehicle and knows
the rules for safe driving. The vehicle can be driven at a maximum of 7 km/h.
20
USE OF THE MULTIFUNCTIONAL MP3 PLAYER (IF YOUR JEEP IS EQUIPED WITH SUCH)
SEE FIGURE 15:
A. Digital voltmeter:
Check the power remaining of your battery, refer to page 19.
B. Mode button: Music mode >> Storytelling mode >> Nursery rhyme mode
C. Play / Pause
D. Next / :
Long press for increasing volume
E. Previous / volume-: Long press for decreasing volume
F. 3.5mm AUX input:
Allows the audio from your portable music player or phone to be played through the
jeep’s speakers. MP3 format
ONLY.
G. USB interface:
Allows the audio from your portable music player to be played through the
jeep’s speakers. MP3 format ONLY.
DOOR LOCK USE
SEE FIGURE 17:
NOTE:
Close the door and ensure the lock has snapped into place, when Your child is using the jeep, to ensure its
safety.