Moni 08104, Инструкция по эксплуатации

Страница: 11 / 39

11
Find the battery cover on the back of the mechanism. Use a screwdriver to loosen the cap screws. Take it off.
Insert 4 1.5 V type AA (LR6) alkaline batteries (not included), observing the polarity marked on the bottom of the
compartment. Put the battery cover back on and tighten the screws with a screwdriver. Do not overtighten.
To remove the batteries, repeat the steps.
Note: Restart the electronics if the mechanism becomes unstable. Turn off the power button, remove the
batteries, and then insert them following the steps above.
IMPORTANT! The batteries are exhausted if the vibration and volume of the music weaken. Replace them with
new ones and dispose of used batteries in the designated area.
WARNING!
•
Only an adult should handle the batteries.
•
Always use new batteries.
•
If you are not going to use the product for a long time, remove the batteries.
•
Remove used batteries from the product and dispose of them in the designated areas, not in household waste
containers.
•
Do not dispose of batteries in a fire as there is a risk of explosion or leakage.
•
Non-rechargeable batteries are not to be recharged.
•
Use only the type of battery recommended by the manufacturer.
•
Different types of batteries are not to be mixed.
•
New and used batteries are not to be mixed.
•
Batteries are to be inserted with the correct polarity.
Protect the environment by not disposing of this product in household waste
containers (2002/96 / EU). Check the recommendations of local authorities.
IMPORTANT!
The diagrams and figures in this instruction are illustrative and indicative only.
Follow exactly the instructions and sequence for assembling and operating with the product.
Check the securing of the fixation after each operation.
Fixing a certain position in most cases is accompanied by a clicking sound.
Components - illustration A
After unpacking, make sure that all elements of illustration A are available.
Assembling the base - illustration C
Insert tubes 2 and 3 at the bottom of the music mechanism (1).
Assembly of the structure - illustration D
Insert tubes 4 and 5 at the top of the music mechanism (1).
WARNING! Make sure that the base is assembled correctly and is stable, this ensures the safety of your child!
Upholstery installation - illustration E
Connect the two elements of part 6 and carefully insert into the hole at the top of the upholstery (7). Fix in the upper
part of elements 4 and 5. Place the upholstery on the lower part of the structure and fasten the fixing belts under the
seat behind the mechanism.
Placing a canopy - illustration F
Fix item 8 to item 6.
INSTRUCTIONS AND WARNINGS FOR WORKING WITH BATTERIES - illustration B
ASSEMBLY INSTRUCTIONS