background image

User’s Guide

EMS 1.7R

8

Arming

With all door, hood, trunk closed and with the ignition off press button 1 once

to arm the alarm system.

When the alarm is armed and the doors lock the siren will beep once and the

indicators will flash once, the LED will flash slowly to indicate that the system
is armed.

The LCD Transceiver will confirm the alarm system is armed with a beep,

and the LCD screen will display an armed state.

Defective Zone Warning

If any door, trunk, or hood is not shut properly while arming the siren will emit three additional

beeps and the indicators will flash three times.

Shining Light Warning

This feature can be selected using programming.

If this function is selected for the Positive Programmable Output the siren will warn you with

a long beep when you get out of the car, when the parking lights have been left switched on.

Dome Light Car Detection

This feature can be selected using programming.

If the interior light in your car includes a delay when the door is closed turn this function on,

there will be no additional warning beeps on arming the alarm system with the interior light left
switched on because of the timed delay. The door open icon will still appear on the LCD screen
when alarm is armed with the interior light switched on, and it will disappear as soon as the light
is switched off.

Armed

When the alarm system is armed and triggered it will be triggered for 30 seconds or until you

press any transmitter button or enter the override code (PIN code) once any door, hood or trunk
is opened or the shock sensor (or optional sensor) is triggered. If the prewarn zone of the shock
sensor (optional sensor) is triggered, this will cause the siren to emit a few short beeps.

The LCD Transceiver will turn on a warning melody, which is different tone to Indicate each

different zone trigger or prewarn input, LCD backlighting, and a respective LCD icon to display a
triggered zone. See Table below for more details.

Автомобильная охранная система “MONGOOSE” Модель EMS 1.7R

45

РУССКИЙ

Управление охранной системой без использования пульта

дистанционного управления (MAwK

TM

).

Mongoose EMS 1.7 предоставляет Вам возможность управлять постановкой/снятием

с охраны используя штатный ключ автомобиля или режим автопостановки, PIN код и
режим задержки включения тревоги при открытии двери в состоянии охраны.

Постановка на охрану штатным ключом. 

 Для того, чтобы при запирании дверей сис

тема вставала на охрану включите при установке системы функцию 26 в таблице
установочного программирования. После включения функции 26 запирание две
рей ключом будет сопровождаться постановкой на охрану. Снять сигнализацию с
охраны, отпирая двери ключом, нельзя.

Задержка включения тревоги при открытии двери.

 Используя функцию 36 в таблице

пользовательского программирования, Вы можете задать 15 или 30 секундную за
держку включения тревоги после открытия двери в состоянии охраны, что позволит
Вам, открыв дверь ключом, сесть в автомобиль и ввести PIN код. Если в течение
15(30) секунд  PIN код не введен, включится сирена и сигнальные фонари.

Выход на пейджер.

  Во избежание несанкционированного проникновения в автомо

биль, выход на пейджер будет активирован немедленно после открывания двери,
невзирая на включенный режим задержки тревоги.

Функции диагностики

Предупреждение о неисправности.

Если при постановке на охрану какаялибо дверь, капот или багажник окажутся

незакрыты, фонари мигнут 3 раза, и Вы услышите 3 дополнительных коротких звуко
вых сигнала.

Соответствующая пиктограмма отразится на дисплее пульта управления.

Память тревог.

В случае включения тревоги в период охраны, при снятии с охраны Вы услышите

четыре дополнительных коротких звуковых сигнала. После включения зажигания 3
сериями вспышек светодиода система сообщит о причине вызвавшей тревогу.

Количество вспышек в серии

Вид датчика

2

Салонный датчик

3

Концевик двери «» или «+»

4

Концевик багажника «»

5

Зажигание

6

Концевик капота

Примечание: При активированных режимах Anti Hijack или Пассивный иммоби

лайзер после включения зажигания светодиодная индикация будет соответствовать ак
тивированному режиму, индикация же причины тревоги включится после его отключе
ния.

Содержание EMS 1.7R



























Отзывы: