Money Controls SCH2, Техническое руководство

Страница: 15 / 61

SCH2 Technical Manual TSP016.doc Issue 3.0 – January 2005

Money Controls 2005. All rights reserved.
Page 15 of 61
10.2 Auxiliary Connector Type
Figure 3: SCH2 Auxiliary Connector
PCB Connector
2.54mm ( 0.1inch ) pitch
Part No. : TBD
Keying Information
10.21 AUXILIARY CONNECTOR PINOUT
Pin Function
1 High Level Plate
3 Low Level Plate
5 Plate Common
2 High Level Link
4 Low Level Link
6 Link Common
10.3 Operation
To notify the hopper software that level plate sensors are fitted, the link pins should be
connected as follows…
Mode Connections
High level plates only pin 2 to pin 4
Low level plates only pin 4 to pin 6
High & low level plates pin 2 to pin 4 to pin 6
Otherwise, no connections should be made.
The level plates themselves should be connected through the corresponding plate pin ( pin 1
for high level, pin 3 for low level ) and the plate common ( pin 5 ).
1 3 5
2 4 6