Monessen Hearth SDV500 Скачать руководство пользователя страница 60 | Manualshive

Страница: 60 / 60

background image

A

ug.

200

6

P/N 56D0106 • Rev. 7

LIMITED LIFETIME WARRANTY POLICY

LIFETIME WARRANTY

The following components are warranted for life to the original owner, subject to proof of purchase: Firebox, Combustion
Chamber, Heat Exchanger, Grate and Stainless Steel Burners.

FIVE YEAR WARRANTY

The following components are warranted ﬁve (5) years to the original owner, subject of proof of purchase: Ceramic Fiber
Logs.

BASIC WARRANTY

Monessen Hearth Systems (MHS) warrants the components and materials in your gas appliance to be free from manufac-
turing and material defects for a period of two years from date of installation. After installation, if any of the components
manufactured by MHS in the appliance are found to be defective in materials or workmanship, (MHS) will, at its option,
replace or repair the defective components at no charge to the original owner. MHS will also pay for reasonable labor costs
incurred in replacing or repairing such components for a period of two years from date of installation. Any products presented
for warranty repair must be accompanied by a dated proof of purchase.

This Limited Lifetime Warranty will be void if the appliance in not installed by a qualiﬁed installer in accordance with the
installation instructions. The Limited Lifetime Warranty will also be void if the appliance is not operated and maintained
according to the operating instructions supplied with the appliance, and does not extend to (1) ﬁrebox/burner assembly
damage by accident, neglect, misuse, abuse, alterations, negligence of others, including the installation thereof by unquali-
ﬁed installers, (2) the costs of removal, reinstallation or transportation of defective parts on the appliance, or (3) incidental
or consequential damage. All service work must be performed by an authorized service representative.

This warranty is expressly in lieu of other warranties, express or implied, including the warranty of merchantability of ﬁtness
for purpose and of all other obligations or liabilities. MHS does not assume for it any other obligations or liabilities in con-
nection with sale or use of the appliance. It states that do not allow limitations on how long an implied warranty lasts, or do
not allow exclusion of indirect damage, those limitations of exclusions may not apply to you. You may also have additional
rights not covered in the Limited Lifetime Warranty.

MHS reserves the right to investigate any and all the claims against the Limited Lifetime Warranty and decide upon method
of settlement.

For information about this warranty, contact:

Technical Services

Monessen Hearth Systems

149 Cleveland Drive

Paris, Kentucky 40361

. 7

• Rev.

A

ug.

200

6

«
...
58
59
60

Содержание SDV500





























































Отзывы:

Нет отзывов

Похожие инструкции для SDV500

Бренд: Napoleon Страницы: 4

Бренд: Napoleon Страницы: 4

Бренд: Napoleon Страницы: 2

Бренд: Piazzetta Страницы: 54

Бренд: Travis Industries Страницы: 8

Бренд: Xaralyn Страницы: 15

COMPACT FIREPLACE

Бренд: Dimplex Страницы: 14

CASUAL FIRESIDE FORMA 5152-2545O

Бренд: O.W. Lee Страницы: 28

Бренд: barbas Страницы: 32

Бренд: Jøtul Страницы: 56

Бренд: Nu-Flame Страницы: 15

Бренд: Blue Rhino Страницы: 8

Бренд: Napoleon Страницы: 36

Бренд: HEINZE Страницы: 2

DVLINEAR36 Series

Бренд: Hearth & Home Страницы: 2

Бренд: Napoleon Страницы: 50

Biochimenea Pur Line Selene

Бренд: climacity Страницы: 4

VIVALDI DE LUXE VVLD20

Бренд: EWT Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды