background image

 SmartSELECT Merchant Operating Manual v 2.0

175

Error Messages & Troubleshooting

J.5: PINPad Error Messages

MESSAGE

SOLUTION

CARD PROBLEM

PROBLEM DE CARTE

The customer has swiped a card on the PINPad’s 
Magnetic Stripe Reader (MSR) and the informa-
tion on the card’s magnetic stripe was not read 
properly. Ask the customer to try swiping the card 
again in a different manner, e.g. if they swiped it 
down, swipe it up or more quickly or more slowly 
or try the SmartSELECT’s MSR.

NO CREDIT CARD

SWIPE ON PINPAD

You or the customer has swiped a Credit Card on 
the PINPad’s Magnetic Stripe Reader (MSR).
The terminal displays the prompt 

No Credit Card 

Swipe on PINPAD

.

Swipe the Credit card on the terminal’s MSR to 
continue the transaction

NOT COMPLETED

PLEASE RETRY

The customer has not responded to the prompts 
on the PINPAD within the time limit. Press 

Exit

 

on the SmartSELECT touch screen to return to 
the Idle screen then retry the transaction.
The terminal displays the prompt 

Declined--Retry 

PINPAD Timeout

.

If the customer presses 
the 

CANCEL

 button on the 

PINPad before the 

Please 

Wait for Message

 prompt 

appears.

The 

CANCELLED

 prompt appears on the termi-

nal and the PINPad then they return to their Idle 
prompts. Restart the transaction.

If the customer presses 
the 

CORR

 button on the 

PINPad at any other PIN-
Pad prompt (before the 

Please Wait for Message

 

prompt appears)

The previous prompt re-appears on the PINPad. 
The customer enters the correct response to the 
prompt and the transaction continues.

If the customer presses 
the 

CORR

 button on the 

PINPad at the 

Transaction 

Amount - OK?

 prompt

Re-enter the transaction amount on the terminal 
and press 

Enter

 then continue from the 

Transac-

tion Amount - OK?

 prompt on the PINPad.

Содержание smartselect







































































































































































































Отзывы: