Moneris Mobile 8100 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 86

Moneris Mobile 8100 Скачать руководство пользователя страница 7

Moneris Mobile 8100 Merchant Operating Manual v1.01

1

CHAPTER 1: Getting Started

This guide explains how to use the terminal’s transaction processing features and
provides information on how to configure the terminal operating features such as
the modem and backlighting options and the debit and credit transaction func-
tions. It also explains how to run close batch and balance reports.

1.1: Setting Up Your Terminal

Before you can begin using your

Mobile 8100

terminal, you will need to:

1. Unpack your terminal and confirm that all items listed in

Section

nal Package Contents

are there.

2. Load paper into the terminal’s paper well.

See

Section

1.3: Loading Paper

for instructions.

3. Set up the charging base and fully charge the terminal’s battery.

See section

1.4: Setting Up the Slow Charging Base

and

4.1: Charging the

for instructions.

IMPORTANT:

The battery must be FULLY charged before using the
terminal for the first time.

4. Take the terminal off the base.
5. If the terminal is not already on, turn it on by pressing

OK

. The terminal will

display

TERMINAL SETUP REQUIRED

.

6. Change the password.

See

Section 6.6: Change Password – ADMIN 12.

IMPORTANT:

The terminal will not accept any transaction or
ADMIN function until the default password is
changed.

If an attempt is made to process a

transaction, the terminal will display the following error
message

TRANSACTION NOT ALLOWED

.

7. Configure the terminal options.

See

Section 5.1: Terminal Configuration - ADMIN 08.

8. Configure the communications.

See

Section 5.2: PPP Configuration - ADMIN 45

.

9. Initialize the terminal.

See

Section 6.2: Initialization – ADMIN 01.

10. Perform a Log On transaction.

See

Section 6.3: Logon – ADMIN 02.

Refer to

CHAPTER 4: Operating Your Terminal

for information on operating the

Mobile 8100

and navigating the menus.

Refer to

CHAPTER 7: Processing Credit Card Transactions

and

Processing Debit Card Transactions

for instructions on performing financial

transactions.

«
...
5
6
7
8
9
...
»

Содержание Mobile 8100























































































Отзывы:

Нет отзывов