Moneris Mobile 8100 Скачать руководство пользователя страница 21

Страница: 21 / 86

Moneris Mobile 8100 Merchant Operating Manual v1.01

CHAPTER 4: Operating Your Terminal

The

Mobile 8100

terminal enables operators to process credit and debit transac-

tions anywhere they receive wireless communications coverage.

4.1: Charging the Battery

The terminal is powered by a Ni-MH (Nickel Metal Hydride) battery that attaches
to the bottom of the terminal. The battery recharges while it is on the charging
base and NOT in use.

The battery can be charged by itself or with the terminal attached to it.

1. If the terminal is attached, ensure that the battery is seated properly on the

back of the terminal.

2. Place the battery on the charging base, ensuring that the metal contacts on the

battery touch the metal contacts on the base.

3. The green light on the front of the base will light up when the battery is seated

on the base properly and is being charged.

Note:

If the terminal is attached to the battery on the base, the terminal will
power-up and remain on while the battery is being charged.

IMPORTANT:

If you are charging the battery for the first time, it must
remain on the base for at least 16 hours in order to be
fully charged.

Refer to

Section 2.1.8: Battery Pack

for more information on battery use and care.

4.2: Powering Up the Terminal

Press the

key to power the terminal back up after it has powered off.

The modem powers up in off-line mode. It logs onto the network during the first
transaction that is performed.

4.3: Powering Off the Terminal - ADMIN 00

Use this function to turn the terminal off and conserve battery power.

TERMINAL DISPLAY

OPERATOR'S ACTIONS

SWIPE CARD OR

PURCH REF OTHR

Press

ADMIN

ENTER ADMIN CODE

Key in

and press

OK.

CDMA SHUT DOWN

IN PROGRESS

The terminal is shutting down.

Process complete when the screen is blank.

Содержание Mobile 8100























































































Результаты поиска

Содержание Mobile 8100

Отзывы:

Похожие инструкции для Mobile 8100

Бренды по названию

Популярные бренды

Moneris Mobile 8100, Руководство по эксплуатации

Результаты поиска

Содержание Mobile 8100

Отзывы:

Похожие инструкции для Mobile 8100

Бренды по названию

Популярные бренды