Mondolfo Ferro TBE 156 PRO N, Руководство оператора

Страница: 57 / 194

TBE 156 PRO N - DE LUXE - SUPER 57
REMOVING TYRES FROM
WHEELS WITH SPLIT RING
Place the bead breaker disk against the
rim from the outside, rotate the turntable
and at the same time move the carriage
from right to left so that the tyre is pushed
inward (Fig. 23).
23
The bead breaker must be moved forward
gradually, so that the turntable completes at
least one revolution each time the breaker
is moved. Remove the locking rings (Fig. 24).
24
Place the bead breaker disk on the inside
of the wheel, moving the carriage to the
right until the tyre is completely removed,
ensuring that the inner tube valve fits into
its seat (Fig. 25).
25
FITTING TYRES ON WHEELS
WITH SPLIT RING
After lubricating the surface of the rim and
the tyre beads with the special grease, fit
the tyre complete with inner tube and flaps
onto the wheel. Place the tyre on the table,
place the rim coaxial with the tyre, move
the jaw forward so that the tyre is inserted
onto the rim, and fit the inner tube valve
in its seat. Press the second bead with the
disk until the seats of the elastic rings on
the rim are free, then fit the locking rings
(Fig. 26).
26