Mondolfo Ferro TBE 156 PRO N, Руководство оператора

Страница: 51 / 194

TBE 156 PRO N - DE LUXE - SUPER 51
REMEDY
1 Replace the line
2 Replace the seals
PROBLEM
The jaw of the turntable will not turn in
any circumstances
POSSIBLE CAUSE
1 Inverter faulty
2 Control lever faulty
REMEDY
1 Replace the inverter
2 Replace the control lever
PROBLEM
The jaw of the turntable does not turn
(motor buzzes)
POSSIBLE CAUSE
1 The motor is operating on two phases only
REMEDY
1 Check the wires on the plug or on the
inverter
2 Replace the inverter or the remote
switches
3 Replace the motor.
PROBLEM
The jaw of the turntable has no rotation
force
POSSIBLE CAUSE
1 Belt tension inadequate
2 The bead breaker cylinder is pressing
too hard against the tyre
REMEDY
1 Adjust the belt tension/replace the belt
2 Lubricate the bead
14 INSTRUCTIONS
FOR USE
CAUTION
The TBE 156 PRO model must only be
used by authorised personnel.
Remember that any use by people not
familiar with the procedures specified
in this manual might cause dangerous
situations.
Control lever box (Fig. 4)
1
3
5
4
2
7
6
4
1 Emergency switch
2 4-position control lever for clockwise
and anti-clockwise rotation of the turn-
table, (tool raising and lowering - DL
- SUPER)
3 4-position control lever for turntable arm
raising or lowering and wheel moving to
the right and left
4 Turntable opening button
5 Turntable closing button
6 Rapid tool travel button (DL - SUPER)
7 Tool and bead breaker disk rotation
control lever (SUPER)
N.B.: USE THE HANDLE PROVIDED TO
MOVE THE CONTROL LEVER ARM