Monark 839 E, Руководство пользователя

Страница: 31 / 40

Monark Ergomedic 839 E
31
8 Service
8.1 Service check & maintenance
To keep your Ergometer in good shape you should make a regular service.
Ser
vice
Service action Approx
time con-
sumtion
Suggested ser-
vice interval
Keep your Ergometer clean and properly lubricated 5 min once per week
Periodically wipe the surface with a rust preventative, especially when
it has been cleaned and the surface is dry. This is done to protect the
chrome and zinc parts as well as the painted parts.
5 min 4 times per year
Check now and then that both pedals are firmly tightened. If not
the threading in the pedal arms will be damaged. Also check that
pedal arms are firmly tightened on the crank axle, tighten if necessary.
When the Ergometer is new it is important to tighten the pedals after
5 hours of pedaling.
5 min 4 times per year
Check that the pedal crank is secure to the crank axle. 5 min 4 times per year
Be sure that the pedals are moving smoothly, and that pedal axle is
clear of dirt and fibers.
5 min 4 times per year
When cleaning and lubricating be sure to check that all screws and
nuts are properly tightened.
10 min 2 times per year
Check that the chain is snug and there is no play in the pedal crank. 15 min 2 times per year
Check that pedals, chain and freewheel sprocket are lubricated. 5 min 2 times per year
Be sure that the brake belt does not show significant signs of wear. 15 min 2 times per year
Check that the handlebars and seat adjustment screws are lubrica-
ted.
5 min 2 times per year
Be sure that all moving parts as crank and flywheel are working nor-
mal and that no abnormal play or sound exists. (Play in bearings
causes them to wear faster, shortening the life of the bike.)
Pay attention
to any malfunc-
tions, the faults
must be addres-
sed immedia-
tely before any
further use of
the bike.
Check that the flywheel is placed in the center and with plane rota-
tion.
Check that the washer for locking the saddle post is in place.
8.2 Transport
At transport the tension device should be somewhat tightened to prevent the brake belt from falling
off of the flywheel.
Fix the pendulum with a string or plastic tape
.