7
Converting Domestic models to Horeca models
Connect to power supply and turn on
Display will show WELCOME then change to alternate between Time and Hardness. If required Model No
not shown, progress to below.
Press Scroll button
and hold for 10 seconds. Display will change to System Settings
Press ‘Up’ arrow within 10 seconds of display saying System Settings and display will change to flashing
display Set Date, time, etc
Values within display will flash. These can be adjusted by Up and Down keys, but do not need adjusting.
Press Scroll button
repeatedly until display advances to:
NOTE: Flashing text is correct text.
Press ‘Up’ arrow to change display to ON
Press Scroll button
and display changes to EXIT
Press ‘Up’ button to confirm Exit. Display will revert back to alternating display
To convert to Time, Hardness with Days Override – CS Models
Display will show WELCOME then change to alternate every 10 seconds between Time, Hardness and
Override
Press ‘Up’ + ‘Down’ buttons together for 5 seconds to enter Factory Settings. Display will change to Valve
Settings & 85HE Up-flow.
Press Scroll button
repeatedly until Company Label shows in display.
Go down list by using ‘Down' button until model number is highlighted. In case of CS100 HE only, use ‘Up’
button. Press Scroll button
to confirm. Display will change to Salt Efficiency
Press Scroll button
and hold for 3 seconds. Display will return to alternating display where new model
number will be shown, plus Time, Hardness and Override will change every 10 seconds.
Programming is complete. Disconnect power
Company label guide chart
Model
Height
Horeca
Domestic
Grey/marble small unit
479mm
CS100 HE
MiniAqua HE
Grey/marble middle unit
554mm
CS150 HE
Midi HE
Grey/marble large unit
707mm
CS200 HE
Master HE
Grey/marble largest unit
1038mm
CS300HE
Matrix HE
