5
COMPONENT SPECIFICATIONS
SPSR-IM Interface Module
Internal Batteries:
Nickel Metal Hydride (NiMH) Battery Pack, 4.8 Vdc
Operating Interval:
>40 hours typical with ROS-P (~40mA load)
Charge Time
:
up to 4 hours
Output:
TTL compatible pulse, INVERTED or NON-INVERTED – switch
selectable. With an ROS (negative pulse) input, the output will be
a positive pulse when set to inverted or negative pulse when set to
non-inverted. Optionally, the output can be open collector (external
pull up is required).
Bandwidth:
0 to 100 kHz
Battery Current Draw:
12mA with 10 k
Ω
load (operational)
7.5V Input Current Draw:
14mA with 10 k
Ω
load (operational)
Power Supply:
SPSR-U (operational/charge)
LED Indicator:
Status indication, see LED Indication section
Output Connector:
BNC Connector (female)
Operating Temp:
32° F to 122° F [0° C to 50° C]
Weight:
8.3 oz. [235 grams]
Dimensions:
5.0” x 2.5” x 1” [127 mm x 64 mm x 25 mm]
6
ROS-P Remote Optical Sensor
Operating Envelope
: Up to 3 feet [0.9 m] and 45
°
from reflective target
Speed Range:
1 to 250,000 RPM
Illumination Source:
Visible red LED, 5 Vdc @ 30 mA
Operating Temp:
14° F to 158° F [-10° C to 70° C]
Output Signal:
5 to 0 Vdc TTL compatible pulse
On-Target Indicator:
Green LED on end cap
Material:
303 Stainless steel
Lens:
Acrylic plastic
Cable Length:
8 feet [2.5 m] Standard
Dimensions:
Threaded Tube - 2.90” L x 0.625 “ diameter [M16
x 1.5 x 74 mm] supplied with two M16 jam nuts
and mounting bracket
Remote
Sensor
Input Jack
Recharger
Jack
SPSR-IM Dimensions
M16 x 1.5
Green
On Target LED
0.62” [15.9mm]
2.90” [74.0mm]
ROS-P and mounting bracket Dimensions
