background image

Safeguards and Precautions

1.  Read and follow all instructions in this manual carefully, and 

retain this manual for future reference.

2.  Do not use this instrument in any manner inconsistent with 

these operating instructions or under any conditions that 

exceed the environmental specifications stated.

3.  This instrument is not user serviceable.  For technical 

assistance, contact the sales organization from which you 

purchased the product or Monarch Instrument directly.

In order to comply with EU Directive 2012/19/EU on Waste 

Electrical and Electronic Equipment (WEEE):  

This product may 

contain material which could be hazardous to human health and 

the environment.  DO NOT DISPOSE of this product as unsorted 

municipal waste.  This product needs to be RECYCLED in accordance with 

local regulations, contact your local authorities for more information.  This 

product may be returnable to your distributor for recycling - contact the 

distributor for details.

NOTE:

 This product contains Nickel Metal Hydride (NiMH) batteries which 

must be recycled.  Refer to the Battery Disposal section on page 4 for details.

Monarch Instrument’s Limited Warranty applies.  See www.

monarchinstrument.com for details.
Warranty Registration and Extended Warranty coverage available 

online at www.monarchinstrument.com.

TABLE OF CONTENTS

TABLE OF CONTENTS

INTRODUCTION

 ...................................................................

1

FUNCTIONS AND OPERATION

 ...........................................

1

SPSR Interface Module ..................................................

1

Connections ..............................................................

2

Controls ....................................................................

2

LED Indication ..........................................................

3

Recharging the Batteries ..........................................

3

SPSR-115/230 Series - SPSR-IM with ROS-P  ..............

3

ROS-P ......................................................................

3

Operating the SPSR as a triggering source .............

4

BATTERY DISPOSAL

 ...........................................................

4

COMPONENT SPECIFICATIONS

 ........................................

5

SPSR-IM Interface Module  ............................................

5

ROS-P Remote Optical Sensor.......................................

6

SENSORS / OPTIONS AND ACCESSORIES

 ......................

8

Содержание SPSR-115/230 Series








Отзывы: