19
ESCAPE
button or
LED ON/OFF
Active
SETTING
MENU or
SELECT
button
Use Rotary Knob or Arrow Buttons to adjust
18
Monarch Instrument • IllumiNova™ Stroboscope User Manual
11.0 OPTIONS AND ACCESSORIES
P/N
Model
Description
6280-090
Remote Controller
Remote Controller with LCD Display provides
remote operation up to 100 feet away from
strobe. Includes 25 foot Cat 5E interconnect/
power cable
6280-091
Input Cable
Input Cable, 5 meter with 5-pin M12
connector and tinned leads
6280-092
Output Cable
Output Cable, 5 meter with 4-pin M12
connector and tinned leads
6280-093
Mounting
Hardware
Set
Spare mounting hardware set includes two
position-able “L” brackets and 80/20 mounting
hardware
6180-038
CSLS
Compact Smart Laser Sensor with 6 foot power/
output cable with tinned leads and 12 inches of
T-5 re
fl
ective tape
6280-095
Input Connector
5 pin Aviation M12 input connector only
6280-094
Output Connector
4 pin Aviation M12 output connector only
P/N 6280-090
P/N 6280-091
P/N 6280-092
P/N 6280-093
P/N 6180-038
JOG
KEYPAD
X2 /
˜
2
NONE, PHASE, TIME,
dial or up/dwn> to change modes
dial or up/dwn and <> to change values, then to set
dial or up/dwn to change memory locations to overwrites any preset #s
MEMRY
RM (1-10) or for SM (1-10)
(to return to menu settings)
MISC
BRITE
input
number
input
number
(to SET)
DEG/PCNT displayed,
ON = Lamp for ON Off, reset Mode to Int or Ext to disable lamp mode
Recall setting RM (1-10) to set flash rate
Load current flash setting into SM (1-10)
dial or up/dwn to locate memory setting, then to use as current flash rate
(to return to menu settings)
Low, High, Med,
Int, Ext, ON
WIDTH
MODE
TIME displayed
(to SET)
dial or up/dwn and <> to change values, then to set
(to SET)
BKLIT
ON, OFF
OUTP
POS, nEG, SEr
UNITS
DECPT
dial or up/dwn to define choice
(to SET)
(to SET)
(to SET)
(to SET)
(to SET)
(to SET)
Enabled (Enb), Disabled (dIS) dial or up/dwn to define choice
dial or up/dwn to select
dial or up/dwn to define choice
use on-screen touch screen to input values and on-screen to set
scale values ‘flashing’, use dial to select (ft/s, ft/m, i/sec, i/m, .... h--)
(to return to menu settings)
(to return to menu settings)
(to SET)
dial or up/dwn to define choice
(to return to menu settings)
(to return to menu settings)
(to return to menu settings)
none, 1, 2, 3
INPUT
POS, nEG,
PRESCALE
DUTY
DEG or Percent (PErCnt %)
SCALE
RPS, RPM, FPS, FPM
STANDBY
Subset of miscellaneous option settings
dial or up/dwn and <> to change values, then to set
RPM
START
SCREEN
POWER button
Menu/Enter for navigation
and to save setting changes
RETURN or EXIT button
KEY
Up/Down to change number values
Left/Right to select digits to change
Indicates current setting
Down/Up navigation button
Menu Navigation Quick Start
P/N 6280-094
P/N 6280-095
P/N 6
80-095
