LCD Colour Monitor
1 Operating Elements and Connections
1 Power LED
2 Functional LEDs
CONTRAST
BRIGHT
COLOR
TINT (without function for this unit)
VOLUME
3 Button MODE for selecting the functions contrast,
brightness, colour, and volume
4 Buttons
"
and
#
for adjusting the selected function
5 Button POWER for switching on and off
6 Set-up bracket and support
7 Input VIDEO IN for connecting the video output of
the signal source
8 Input AUDIO IN for connecting the audio output of
the signal source
9 Jack +12V for power supply (12 V ),
connection via a low voltage plug 5.5/2.1 mm
(outside/inside diameters),
centre contact = positive pole
10 Phono/BNC adapter (2 pieces)
2) Connect the audio output of the signal source to
the jack AUDIO IN (8).
3) Connect an electronically regulated 12 V power sup-
ply unit with a minimum power rating of 500 mA (e. g.
PS-1204ST by MONACOR) to the jack +12V (9).
A low voltage plug 5.5/2.1 mm (outside/inside dia-
meters) is required. Apply the positive pole to the
centre contact of the plug.
6 Operation
1) Switch on the monitor with the button POWER (5).
The power LED (1) lights up.
2) Adjust an optimum picture and volume. For this
purpose, press the button MODE (3) so many
times until the corresponding functional LED (2)
lights up. The power LED (1) is extinguished.
Sequence of functions:
CONTRAST
BRIGHT
COLOR
VOLUME
Use the buttons
"
and
#
(4) to adjust the selected
function. As long as one of the buttons is kept
pressed, the corresponding functional LED (2)
blinks. If it lights continuously, the minimum or
maximum value is reached. If none of the buttons is
actuated any more, the functional LED is extin-
guished after approx. 5 seconds and the power
LED lights up again.
3) If all settings have unintentionally been completely
misadjusted (e. g. screen completely dark or com-
pletely bright), the factory-set standard values can
be recalled:
a) Switch off the monitor with the button POWER
(5).
b) Keep the buttons MODE (3) and POWER (5)
pressed simultaneously.
c) Release the button POWER first, then the but-
ton MODE. All LEDs (1 + 2) light up. After a short
time, only the power LED (1) is still illuminated.
Thus, the standard values are set.
4) For switching off, actuate the button POWER (5).
The power LED (1) is extinguished. If the monitor is
not used for a longer period, disconnect the power
supply unit from the mains socket. Even with the
monitor switched off, the power supply unit will
otherwise have a low current consumption.
7 Specifications
Screen: . . . . . . . . . . . . TFT active matrix
Screen diagonal: . . . . . 10 cm (4")
Colour system: . . . . . . . PAL
Synchronization: . . . . . hor. 15 625 Hz, vert. 50 Hz
Resolution: . . . . . . . . . . hor. 480 x vert. 234 pixels
Inputs
video: . . . . . . . . . . . . 1 Vpp/75
Ω
audio: . . . . . . . . . . . . 1 V/10 k
Ω
Power supply: . . . . . . . 12 V
, 500 mA
e. g. via power supply
PS-1204ST by MONACOR
Ambient temperature: . 0 – 40 °C
Dimensions: . . . . . . . . . 143 x 103 x 45 mm
Weight: . . . . . . . . . . . . 500 g
According to the manufacturer.
Subject to technical change.
®
TVLCD-420COL
Order No. 19.5780
Copyright
©
by INTER-MERCADOR GmbH & Co. KG, Bremen, Germany All rights reserved. MONACOR
®
International
07.00.01
CONTRAST
BRIGHT
COLOUR
TINT
VOLUME
MODE
POWER
®
6
7
8
9
12V
AUDIO IN
VIDEO IN
5
4
3
2
1
10
2 Safety Notes
This unit corresponds to the directive for electro-
magnetic compatibility 89/336/EEC.
●
The monitor is suitable for indoor use only. Protect it
against humidity and heat (admissible ambient tem-
perature range 0 – 40 °C).
●
The heat generated within the unit must be carried
off by air circulation. Therefore, do not cover the air
vents on the rear side.
●
For cleaning only use a dry, soft cloth, by no means
chemicals or water.
●
If the unit is used for other purposes than originally
intended, if it is not operated correctly or not re-
paired in an expert way, no liability for any damage
will be accepted.
●
If the unit is to be put out of operation permanently,
take it to a local recycling plant for disposal.
3 Applications
This LCD colour monitor in TFT active matrix techno-
logy offers a sharp, quick and high-contrast picture
display. It is suitable for universal applications, e. g. in
monitoring systems or for multimedia applications. An
integrated small speaker allows sound reproduction.
4 Installation
By means of the set-up bracket (6), the monitor can
either be placed as desired or mounted at a suitable
location. A thread jack (6.3 mm thread,
1
/
4
") on the
lower side of the housing is provided for use of a dif-
ferent support.
5 Connection
Connection to the signal source (camera, video re-
corder, etc.) is made via the two phono jacks VIDEO
IN (7) and AUDIO IN (8). If the outputs of the signal
source are designed as BNC jacks, connect the two
supplied phono/BNC adapters (10) to the phono jacks
of the monitor.
1) Connect the video output of the signal source to the
jack VIDEO IN (7).
GB
