Monacor 18.3110, Инструкция по эксплуатации

Страница: 15 / 16

you press one of the buttons (1) to (5) during the
countdown.
Note: If the button or is pressed during the count-
down, the time indication remains inserted until the
insertion time adjusted under
Duration will be elapsed.
Reset Reset to the factory settings
After activating the menu item with the button ,
after a few seconds all settings of the on-screen
menu are reset to the factory settings. After a
reset the source
HDMI is selected and the vol-
ume is adjusted to the value 50.
7.5.3 Page FUNCTION (for the source PC only)
If the automatic picture adjustment ( chapter 7.4)
should not provide the desired result, the picture
can manually be adjusted via the menu items of
this page:
H-Position horizontal position of the picture
Move the picture to the left with the button or
to the right with the button .
V-Position vertical position of the picture
Move the picture downwards with the button
or upwards with the button .
Clock pixel clock
For fine adjustment of the picture width: if verti-
cal lines appear in the picture, reduce (
) or
increase ( ) the picture width.
Phase
Adjust the phase with the button or so that
a perfect sharpness (e. g. of the display of let-
ters) is reached and there is no horizontal inter-
ference.
8 Specifications
For each monitor
Diagonal screen size: 24.6 cm (9.7″)
Max.resolution: . . . . . 1024 × 768 pixels at 60 Hz
Aspect ratio: . . . . . . . 4 : 3
Pixel distance: . . . . . 0.192 × 0.192 mm
Colour system: . . . . . PAL / NTSC (Auto)
Angle of view: . . . . . . 178° (hor. / vert.)
Time of response: . . < 35 ms
Brightness: . . . . . . . . 350 cd / m 2
Contrast ratio: . . . . . 800 : 1
Audio and video
connections
VIDEO 1/ 2 IN: . . . . BNC jacks
VIDEO 1/ 2 OUT: . . BNC jacks
S-VIDEO: . . . . . . . 4-pole mini DIN jack
HDMI: . . . . . . . . . . 19-pole HDMI
TM jack,
type A
VGA: . . . . . . . . . . . 15-pole Sub-D jack
AUDIO L / R: . . . . . RCA jacks
PC AUDIO: . . . . . . 3.5 mm stereo jack
Complete unit
Power supply: . . . . . 12 V / 3 A
via PSU provided,
connected to 230 V~ / 50 Hz
Connection
for the PSU: . . . . . . . low voltage jack 5.5 / 2.5 mm,
positive pole inside
Ambient
temperature: . . . . . . . 0 – 40 °C
Hole spacing for
mounting a bracket: . VESA 75 × 75 mm
Dimensions: . . . . . . . 482 × 220 × 55 mm
Weight: . . . . . . . . . . . 4.1 kg
Subject to technical modification.
15
GB
All rights reserved by MONACOR ® INTERNATIONAL GmbH & Co. KG. No part of this instruction manual
may be reproduced in any form or by any means for any commercial use.