17
16
CAMERA INSTALLATION – Wiring to Niro
®
2
CAMERA INSTALLATION – Installation Complete
•
Insert the other end of the garage door wires into the Door 1 Terminals illustrat-
ed above on the back of the Niro
®
2 device. You may need to use a tool to push
down on the buttons to release and insert the wires.
•
Once the wires are inserted you may plug back the power for the garage opener.
Note: Both wires are neutral, so it does not matter which wire goes into which of the
two ports.
However, make sure the open wire ends are not touching each other.
•
Congratulations, you have finished installing your Niro®2! See the next page for
how to install the Wireless Door Sensor.
From Garage
Door Wire
(included)
