MagKrimp™ Hydraulic Head Crimper
Doc No. TM-190780422
Release Date: 03-28-14
UNCONTROLLED COPY
Page 5 of 22
Revision: A
Revision Date: 03-28-14
WARNING
MOLEX CANNOT BE RESPONSIBLE FOR DAMAGE OR INJURY RESULTING FROM UNSAFE PRODUCT
USE, LACK OF MAINTENANCE, OR INCORRECT PRODUCT AND SYSTEM APPLICATION.
CAUTION
Failure to observe these precautions may result in injury or property damage.
CAUTION
Never
perform any service or maintenance other than as described in this manual.
Never
modify, alter or misuse the equipment
Molex crimp specifications are valid only when used with Molex terminals, applicators and tooling.
Failure to observe this precaution may result in injury and property damage.
Tooling Technical Assistance
Molex offers tooling technical assistance for customers who may need some guidance for tooling adjustments. This support can
be obtained by calling either of the two numbers listed below and asking for the Molex Tooling Group.
Call Toll Free 1-800-786-6539 (US) 1-630-969-4550 (Global).
This assistance is limited to the operation and set-up of a customer’s Molex Press Assembly. Questions with regard to Molex
connector products or how to identify the proper tooling and/ or tooling documentation should be directed to your local Molex
personnel or Customer Service Representative.
When calling for service on the tool a copy of the
Tooling Manual
and Specific
Applicator Tooling Specification Sheet
should be
present and a person that is familiar with the applicator should be present. Be sure the following information is supplied:
1.
Customer name
2.
Customer address
3.
Person to contact such as (name, title, e-mail, and telephone number
4.
Press order number (Lease number also if applicable)
5.
Serial number (Lease number also if applicable)
6.
Molex Connector product order number
7.
Urgency of request
8.
Nature of problem
Molex Application Tooling Group
2200 Wellington Court
Lisle, IL 60532, USA
Tel: +1 (630) 969-4550
Fax:+1 (630) 505-0049
Visit our Web site at http://www.molex.com
