Hand Crimp Tool for Sealed Single Contact Terminals
Doc No: ATS-6382787HM Release Date: 06-05-15
UNCONTROLLED COPY
Page 7 of 9
Revision: A
Revision Date: 06-05-15
The chart below shows all applications for this Tool Kit.
Tool Kit
Order No.
Tool
Order no.
Tool
Description
Power Head
Order No.
Adapter
Description
Figure
No.
63827-8770
63810-1050 Hand Crimp Frame (Short)
N/A
N/A
8
63810-1000 Hand Crimp Frame (Long)
N/A
N/A
8
63816-0200 Battery Power Tool (110 V) 63816-0300 Power Crimp Head
9
63816-0250 Battery Power Tool (220 V) 63816-0300 Power Crimp Head
9
Applications for the Tool Kit
Hand Crimp Tool
Battery Powered Tool
Figure 8
Figure 9
WARNING
:
NEVER
operate service, install tool kits, or adjust the Power Crimp Head without proper
instruction and without first reading and understanding the instructions in the proper Manual or
Specification Sheet. See Chart above for the correct Manual or Specification Sheet.
WARNING
:
NEVER
install tooling or service this tool while it is into any power source. Make sure the
power is turned off.
CAUTION:
Keep fingers away from the crimping area when operating this tool. It may cause severe injury.
CAUTION:
Wear safety glasses when operating or serving this tool.
POWER
CRIMP
HEAD
LOCKING PINS
BATTERY
POWERED
TOOL
TOOLING KIT
HAND CRIMP
FRAME LONG
AND SHORT
TOOLING KIT
