background image

 

10

 

OPERATING INSTRUCTIONS 

 
 

 

To reduce the risk of fire, personal injury, and 

product damage due to a short circuit, never 

immerse your tool, battery pack or charger in 

fluid or allow a fluid to flow inside them. 

Corrosive or conductive fluids, such as seawater, 

certain industrial chemicals, and bleach or 

bleach-containing products, etc. can cause a 

short circuit.

 

 

If any parts are damaged or missing, do not 

operate this product until the parts are replaced. 

Use of this product with damaged or missing 

parts could result in serious personal injury. 

 

Do not attempt to modify this tool or create 

accessories not recommended for use with this 

tool. Any such alteration or modification is 

misuse and could result in a hazardous condition 

leading to possible serious injury.

 

 

To prevent accidental starting that could cause 

serious personal injury, always remove the 

battery pack from the tool when assembling 

parts, making adjustments, or cleaning the tool.

 

This cordless tool must be used only with the 

battery packs and charger listed below:

 

MOKENEYE

 

Battery Pack

 

2.0Ah

 

B202010MZ

 

3.0Ah

 

B203005MZ

 

4.0Ah

 

B204010MZ

 

MOKENEYE

 

Charger

 

1A

 

C10MZ1US

 

2A

 

C20M1US

 

2A

 

C20MK1US

 

NOTICE: Please refer to the battery and charger 

manuals for detailed operating information. 

FUEL GAUGE BATTERY PACKS 

Some MOKENEYE battery packs include a fuel 

gauge which consists of four green LED lights that 

indicate the level of charge remaining in the 

battery pack. 
The fuel gauge is an indication of approximate 

levels of charge remaining in the battery pack 

according to the following indicators: 
 
 
 
 
 
 
 
 
To actuate the fuel gauge, press and hold the fuel 

gauge button. A combination of the four green LED 

lights will illuminate designating the level of charge 

left. When the level of charge in the battery is below 

the usable limit, the fuel gauge will not illuminate 

and the battery will need to be recharged. 
NOTICE: The fuel gauge is only an indication of the 

charge left on the battery pack. It does not indicate 

tool functionality and is subject to variation based 

on product components, temperature and end-

user application. 
For more information regarding fuel gauge battery 

packs, please send e-mail to Mokeneye Customer 

Service [email protected]

LED FUNCTIONS OF CHARGER 

LED WILL BE ON TO INDICATE STATUS OF CHARGER 

AND BATTERY PACK: 
Charging with C20M1US/C20MK1US charger 

-

 

LED lights up red = Fast charging mode. 

-

 

LED lights up green = Fully charged and in 

maintenance charge mode. 

-

 

LED lights up green = When an under-charged 

battery pack is inserted into charger, indicates hot 

battery pack or that battery pack is out of normal 

temperature range or deeply discharged or 

defective battery pack. 

-

 

No LED on = Defective charger. 

CHARGING THE BATTERY PACK 

Battery packs for this tool are shipped in a low 

charge condition to prevent possible problems. 

Therefore, you should charge it until the green LED 

on the front of the charger comes on. 

CHARGING A COOL BATTERY PACK 

If battery pack is within normal temperature range, 

the red LED on charger will come on. 
NOTE: If the charger does not charge the battery 

pack under normal circumstances, return both the 

battery pack and charger to your nearest Mokeneye 

Authorized Service Center for electrical check. 

-

 

Charge the battery pack only with the charger 

provided. 

-

 

Make sure the power supply is normal household 

voltage, 110~240 volts, 50/60 Hz, AC only. 

-

 

Connect the charger to the power supply. 

-

 

For C20M1US/C20MK1US charger, place the 

battery pack in the charger aligning raised rib on 

the battery pack with the groove in the charger. 

-

 

Press down on the battery pack to be sure 

contacts on the battery pack engage properly 

with contacts in the charger. 

-

 

Normally the red LED on charger will come on. 

This indicates the charger is in fast charging 

mode. 

-

 

Red LED should remain on for approximately 1 to 

2 hours then the green LED will come on. Green 

LED on indicates battery pack is fully charged and 

charger is in maintenance charge mode. 
NOTICE: The green LED will remain on until the 

charger is disconnected from the power supply. 

   

 

80-100% charged 

60-79% charged 

40-59% charged 

Pack needs to be charged 

Содержание PW01Z















Отзывы: