13
-
To start the pressure washer, squeeze the
trigger.
NOTICE: The best angle for spraying water
against a cleaning surface is 45°. Spraying head
on tends to cause dirt particles to embed in the
surface. When working on vertical surfaces, it is
best to apply detergent starting at the bottom
and working upwards which will prevent the
detergent from sliding down and
causing streaks.
-
To stop the pressure washer, release the trigger.
NOTICE: Excessive pump pressure may be the result
of a clogged nozzle or brass coupling. Always turn
off the pressure washer and remove the battery
before attempting to unclog a nozzle or
brass coupler.
Never draw from water that
contains chemicals. Only draw
from fresh water sources.
MAINTENANCE
To avoid serious personal injury, always remove the
battery pack from the tool when cleaning or
performing any maintenance.
SERVICE
Preventive maintenance
performed by unauthorized
personnel may result in misplacing of internal wires
and components which could cause serious hazard.
We recommend that all tool service be performed
by a MOKENEYE Factory Service Center or
Authorized MOKENEYE Service Station.
GENERAL MAINTENANCE
When servicing, use only identical
replacement parts. Use of any
other parts could create a hazard or cause product
damage.
NOTICE: Periodically inspect the entire product for
damaged, missing, or loose parts such as nozzle,
soap bottle, suction hose, etc. Tighten securely all
fasteners and caps and do not operate this product
until all missing or damaged parts are replaced.
Please contact customer service or an authorized
service center for assistance.
CLEANING
◼
Blow dirt and dust out of all air vents with clean,
dry air at least once a week. To minimize the risk
of eye injury, always wear ANSI Z87.1 approved
eye protection when performing this procedure.
◼
Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool.
These chemicals may weaken the plastic
materials used in these parts. Use a cloth
dampened only with water and mild soap. Never
let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
STORAGE
Store the tool indoors in a place that is inaccessible
to children. Keep away from corrosive agents.
TROUBLE SHOOTING
⚫
Problem: Tool does not work.
LIMITED WARRANTY
1 YEAR LIMITED WARRANTY- LEGAL
MOKENEYE warrants to the original purchaser only,
that all MOKENEYE consumer POWER TOOLS will be
free from defects in material or workmanship for a
period of one years from date of purchase.
BATTERIES AND CHARGERS are warranted for 1
years. Original purchasers should also retain their
receipt as proof of purchase.
Notwithstanding the foregoing, if a MOKENEYE
consumer portable power tool is used for industrial,
professional or commercial purposes, the foregoing
warranty will apply for a duration of ninety days.
SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE
REMEDY under this Limited Warranty and, to the
extent permitted by law, any warranty or condition
implied by law, shall be the repair or replacement of
parts, without charge, which are defective in
material or workmanship and which have not been
misused, carelessly handled, or repaired by persons
other than Seller or Authorized Service Station. To
make a claim under this Limited Warranty, you
must return the complete product, transportation
prepaid, to any MOKENEYE Factory Service Center
or Authorized Service Station. For Authorized
MOKENEYE Power Tool Service Stations, please
contact Amazon Store Customer Service.
This limited warranty does not apply to accessory
items such as circular saw blades, drill bits, router
bits, jigsaw blades, sanding belts, grinding wheels
and other related items.
In no event shall seller be liable for any incidental or
consequential damages (including but not limited
to liability for loss of profits) arising from the sale or
use of this product. Some states in the u.s. and
some Canadian provinces do not allow the
exclusion or limitation of incidental or
consequential damages, so the above limitation or
exclusion may not apply to you.
Cause
Remedy
Battery pack is
depleted.
Charge the battery.
Tool is over-loaded.
Release the variable-speed trigger
switch and try again.
Battery pack is over
temperature.
Turn off the Tool and cool the
battery pack under air flow.
Battery pack is not
installed properly.
Confirm battery is locked and
secured to the tool.
Burned out switch.
Have the switch replaced by an
Authorized MOKENEYE Service
Center or Service Station.
