3
connected and properly used.
Use of dust
collection can reduce dust- related hazards.
•
Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles.
A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
•
Do not force the power tool. Use the correct power
tool for your application.
The correct power tool
will do the job better and safer at the rate for
which it was designed.
•
Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
•
Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any
adjustments, changing accessories, or storing
power tools.
Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
•
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool.
Power tools are dangerous in the
hands of untrained users.
•
Maintain power tools and accessories. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool's operation. If
damaged, have the power tool repaired before
use.
Many accidents are caused by poorly
maintained power tools.
•
Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
•
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed.
Use of the power tool for
operations different from those intended could
result in a hazardous situation.
•
Keep handles and grasping surfaces dry, clean
and free from oil and grease.
•
Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in
unexpected situations.
BATTERY TOOL USE AND CARE
•
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
•
Use power tools only with specifically designated
battery packs.
Use of any other battery packs
may create a risk of injury and fire.
•
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another.
Shorting the battery terminals together
may cause burns or a fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
•
Do not use a battery pack or tool that is damaged
or modified.
Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
•
Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or
temperature above 265 °F may cause explosion.
•
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions.
Charging
improperly or at temperatures outside the
specified range may damage the battery and
increase the risk of fire.
SERVICE
•
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is
maintained.
•
Never service damaged battery packs.
Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
SAFETY WARNINGS FOR
OSCILLATING MULTI TOOL
•
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
tool may contact hidden wiring.
Cutting tool
contacting a "live" wire may make exposed metal
parts of the tool "live" and could give the operator
an electric shock.
•
A suitable breathing respirator must be worn while
sanding lead paint, some woods and metal to
avoid breathing the harmful/toxic dust or air.
•
Always wear safety goggles and a dust mask when
sanding, especially when sanding over-head.
•
The machine is not suitable for wet sanding.
•
Do not use sanding paper larger than needed.
Extra paper extending beyond the sanding pad can
cause serious lacerations.
•
Secure the workpiece.
A workpiece clamped with
clamping devices or in a vice is held more securely
than by hand.
•
Keep hands away from the cutting range.
Do not
reach under the workpiece. Contact with the blade
can lead to injuries.
•
Keep your hands away from the motor-housing
vents.
Hot air comes from the vents during
operation.
Содержание OM01Z
Страница 14: ......