36
C.3 Connecting to the MCON
A VNC Client is used to establish a remote desktop connection with the MCON and is required to run a Mojix
configuration and diagnostic utility called Mojo. To establish a VNC connection, enter the following command at the
command prompt.
$ sudo service vncserver start
Now the user can run a VNC Client and connect to the MCON using the following connection address and session
number format.
<ip of MCON>:9
This indicates that session 9 is used to establish the VNC session with the MCON. The following illustrates an example
connection through the RealVNC Client interface.
Figure 38: VNC Client Connection Window
The password to establish the VNC connection is: m0j1xInc
