Mojix
®
STAR 1000 System User Manual
35
Figure 36: Setup Screen
Scroll down to the Network configuration and hit “enter”. From here, select the eth0 interface, which will present the
following screen.
Figure 37: Eth0 Configuration
From here the user can enter any fixed IP address or select DHCP. Once the changes are made, select “Ok” and
Quit out of the setup utility. The user will once again be presented with a command prompt ($ ). For the new network
changes to take place the user must enter the following command.
$ sudo service network restart
The user should note that once this command is issued the new network settings will take place immediately, requiring
the user to re-establish the SSH connection using the new IP address.
