background image

4

RIDING MOWER LIFT

WARNINGS AND SAFETY INSTRUCTIONS

IMPORTANT:

 The mower lift is intended for use with mowers only.  Do not exceed 350 lbs. front end weight.   

It should never be used to service mowers with a front end weight over 350 lbs. 

Read and understand all safety and operating instructions before using the mower lift.  

Never allow anyone unfamiliar with the safety or operating instructions to use the mower lift.

Follow all safety and servicing instructions provided by the lawn mower’s manufacturer before using the mower lift. 

Do not modify the mower lift in any way. Any modifications will void any and all warranties and could  
compromise your personal safety. 

When using the mower lift, keep 

ALL

 bystanders at a safe distance away from the lift.

The mower lift must be used on a solid level surface.

Only lift the front of the mower. Do not lift the front end and the back end of the mower at the same time.

Front end of mower must clear the 6” collapsed height of lift.

Only use the mower lift for mowers that are less than 350lbs front end weight and properly fits in the provided 
wheel pads. (ie. 10” to 19” diameter and with an inside to outside wheel measurements of 19” to 43.5”).

Always stop engine and remove key before beginning any work on the mower.

Always place mower in neutral or disengage the hydraulic drive by following the mower owner’s manual.

Never operate the engine while using the mower lift.

Do not exceed the lifting capacity of 350 lbs. front end weight.

If the mower steel pin breaks, allowing the crank handle to spin freely while lifting the mower, this indicates an  
overload condition. Remove the mower immediately.

Locking Bar must be engaged before starting any service on mower. 

Do not remove safety warnings or decals from mower lift.

Before each use, always check for any worn, loose or damaged parts on the mower lift. If any damaged parts are  
present, do not use the lift and contact customer service at 1-877-575-3173.

No one should be on the mower while it is lifted, being lifted or being lowered.

After the mower is raised to a working height, always place wheel chocks (not included) behind the back tires of  
the mower and engage parking brake. 

Wheel Pads must be set at an equal distance to maintain proper balance. 

Remove all mower attachments before using the mower lift.

Some mowers which are equipped with a fuel tank vent may spill fuel when lifted.  If this happens, run fuel level 
down in the tank to prevent spilling.

Failure to follow these warnings may result in property damage and serious bodily injury or death.

Содержание ZR 350

















Отзывы: